C2005 5-4. 5mm ER 20 Collet* Tangential Knife Part Number: 1211A-5

Part Number: 1211A-5

Part Number: 1121A-4-6

needs changing to: Feed rate between 12500mm/min and 15000mm/min

Tip Diameter: 11mm

Part Number: C20013

C2005 5-4. 5mm ER 20 Collet* Tangential Knife Part Number: 1211A-5These are suitable for use with several spindles including ELTE, HSD, Colombo and Perske. It is essential to use the correct type of collet to fit the spindle on your machine and the tool shank diameter. Tooling Shank Size: 5mm Collet Type: ER20 Length: 31. 5mm Diameter: 21mm Part Number: C2005 Collets should be replaced every 3 6 months. This will avoid problems associated with worn collets including: Poor cut quality Reduced tool life Premature tool